|
Product Details:
Payment & Shipping Terms:
|
| Output Capacity: | 9/10kVA | Output Power: | 7/8kW |
|---|---|---|---|
| Genset Type: | Hidier | Engine: | Perkins |
| Frequency: | 50Hz / 60Hz | Cooling Type: | Water Cooled |
Perkins Diesel Generator Set With Water Cooled System.8KW 50 / 60HZ
| HDP Series HDP8/ HDP8S |
|
Model |
Standby Power |
Prime Power |
Engine |
Alternator |
Control Panel |
|||
|
KVA |
KW |
KVA |
KW |
Stamford |
Hidier(Optional) |
Model |
||
|
HDP8/S |
10 |
8 |
9 |
7 |
403D-11G |
PI044E |
HD8 |
MRS10 |
|
Spec #1.1 Features |
|
|
1 |
Excitation system: self-excited (AREP and PMG are optional) |
|
2 |
ATS (automatic transfer switch) receptacle |
|
3 |
Lockable battery isolator switch |
|
4 |
Stainless galvanized zinc plates with strong corrosion resistance |
|
5 |
Vibration isolators between the engine/alternator and base frame |
|
6 |
Integrated wiring design |
|
7 |
Base fuel tank for at least 8 hours running |
|
8 |
Equipped with an industrial muffler |
|
9 |
50℃ radiator |
|
10 |
Top lifting and steel base frame with forklift holes |
|
11 |
Drainage for fuel tank |
|
12 |
Complete protection functions and safety labels |
|
13 |
IP54 (soundproof sets), IP56 (control system) |
|
14 |
Water jacket preheater, oil heater are available. |
|
15 |
Double air cleaner, spare parts, special tools are available. |
|
16 |
Custom-made is acceptable |
 |
Ratings and Performance Data | ||
| Engine Brand & Model: | Perkins 403D-11G | ||
| Alternator Brand & Model: | Stamford PI044E | ||
| Control System: | ComAp InteliLite®MRS10 | ||
| Noise Level@7m: | 70.9-75.8 | ||
| Frequency & Phase: | 50Hz/60Hz & 3 Phase | ||
| Engine Speed: RPM | 1500/1800 | ||
|
Structure Type: | HDP8 | |
| HDP8S | |||
| Fuel Tank Capacity: L | HDP8 | 50 | |
| HDP8S | 100 | ||
| Fuel Consumption: l/hr (100% Load) | Prime | / | |
| Standby | / | ||
| Generator Set | Length (L) | Width (W) | Height (H) | Net Weight kg |
| Model | mm | mm | mm | |
| HDP8 | 1500 | 700 | 1200 | 350 |
| HDP8S | 1900 | 700 | 1200 | 530 |
|
Spec #1.2 Container Calculation |
||||
|
Generator Set Model |
20’GP pcs |
40‘GP pcs |
40‘HQ pcs |
Efficiency |
|
HDP8 |
N/A |
N/A |
N/A |
N/A |
|
HDP8S |
N/A |
N/A |
N/A |
N/A |
|
Spec#2 Engine Perkins 403D-11G
|
|
|
||||||||||||||||||||||||||||||||
|
Spec #2.2 Engine Output |
|||||||
|
Speed rpm |
Run Type |
Typical Output (Net) |
Engine Power |
||||
|
Gross |
Net |
||||||
|
kVA |
kWe |
kWm |
hp |
kWm |
hp |
||
|
1500 |
Prime |
9.0 |
7.2 | 8.6 | 11.5 | 8.5 | 11.3 |
|
Standby |
10 |
8.0 | 9.5 | 12.7 | 9.3 | 12.4 | |
|
1800 |
Prime |
11.2 |
9.0 | 10.7 | 14.3 | 10.3 | 13.9 |
|
Standby |
12.4 |
9.9 | 11.8 | 15.8 | 11.4 | 15.3 | |
*Subject to conformance with ASTM D6751 and EN14214.
The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS 5514/1. Derating may be required for conditions outside these; consult Perkins Engines Company Limited. Generator powers are typical and are based on typical alternator efficiencies and a power factor (cos θ) of 0.8.
Fuel specification: BS 2869: Part 2 1998 Class A2 or ASTM D975 D2.
Rating Definitions:
Prime Power: Power available at variable load in lieu of a main power network. Overload of 10% is permitted for 1 hour in every 12 hours operation.
Standby (maximum): Power available at variable load in the event of a main power network failure. No overload is permitted.
|
Spec #2.3 Fuel System |
||||
|
Type of injection |
Indirect injection |
|||
|
Fuel injection pump |
Cassette type |
|||
|
Fuel injector |
Pintle nozzle |
|||
|
Nozzle opening pressure |
14,7 MPa |
|||
|
Max particle size |
25 microns |
|||
|
Fuel lift pump |
||||
|
-type |
mechanical (camshaft driven) |
|||
|
-flow/hour |
63 litres/hr |
|||
|
-pressure |
10 kPa |
|||
|
Maximum suction head |
0,8 m |
|||
|
Maximum static pressure head |
3,0 m |
|||
|
Engine Speed |
1500 rpm |
|||
|
g/kWh |
l/hr |
|||
|
Standby |
261 |
2.9 |
||
|
Prime Power |
252 |
2.6 |
||
|
75% of prime power |
258 |
2.0 |
||
|
50% of prime power |
286 |
2.0 |
||
|
Spec #2.4 Cooling System |
|||
|
Radiator |
|||
|
face area |
0.147m² |
||
|
rows and materials |
2 row, Aluminium |
||
|
matrix density and material |
14.5 FPI Aluminium |
||
|
width of matrix |
334 mm |
||
|
height of matrix |
440 mm |
||
|
pressure cap setting |
90 kPa |
||
|
Fan |
|||
|
diameter |
320 mm |
||
|
drive ratio |
1,285:1 |
||
|
number of blades |
7 |
||
|
material |
Plastic |
||
|
type |
pusher |
||
|
Coolant |
|||
|
Total system capacity |
|
||
|
-with radiator |
5.2 litres |
||
|
-without radiator... |
1.9 litres |
||
|
Maximum top tank temperature |
30,4 kPa |
||
|
Temperature rise across engine |
tba °C |
||
|
Shutdown switch setting |
118 °C |
||
|
Max permissible external system resistance |
tba kPa |
||
|
Thermostat operation range. |
75 - 87°C. |
||
|
Recommended coolant: |
|||
|
Recommended coolant: 50% anti freeze / 50% water. For complete details of recommended coolant specifications, refer to the Operation and Maintenance Manual for this engine model |
|||
|
Ambient clearance50% Glycol |
Duct allowancePa |
m³/sec |
|
|
53℃ |
0 |
0.67 |
|
|
46℃ |
125 |
0.44 |
|
|
Spec #2.5 Exhaust System |
|
|
Maximum back pressure |
102 kPa |
|
Exhaust outlet size-horizontal |
34 mm |
|
Exhaust outlet size- -vertical |
40 mm |
|
Spec #2.6 Induction System |
|
|
Maximum air intake restriction |
|
|
clean filter |
3,0kPa |
|
dirty filter |
6,4 kPa |
|
Air filter type |
dry element type |
|
Spec #2.7 Electrical System |
|||||||
|
Alternator |
15 / 40 amps -12 V |
||||||
|
-starter motor |
Bosch 1,1 kW -12 V |
||||||
|
Alternator output |
/ |
||||||
|
Starter |
/ |
||||||
|
Starter motor voltage |
/ |
||||||
|
Starter motor power |
/ |
||||||
|
Cold start recommendations |
|||||||
|
Minimum cranking speed |
150 rev/min |
||||||
|
Minimum starting temperature |
Grade of engine lubricating oil |
Battery specifications |
|||||
|
°C |
BS3911 Cold start amps |
SAEJ537 Cold cranking amps |
Number of batteries needed |
Commercial ref number |
|||
|
0 |
20W |
340 |
540 |
1 |
069 |
||
|
-15 |
10W |
340 |
540 |
1 |
069 |
||
|
-20 |
5W |
540 |
590 |
1 |
072 |
||
Note: Battery capacity is defined by the 20 hour rate
Note: If a change to a low viscosity oil is made, the cranking torque necessary at low ambient temperatures is much reduced. The starting equipment has been selected to take advantage of this.
It is important to change to the appropriate multigrade oil in anticipation of operating in low ambient temperatures
|
Spec #2.8 Lubrication System |
|||
|
Lubricating oil capacity |
|||
|
Max. sump capacity |
4,4 litres |
||
|
Min. sump capacity |
4,9 litres |
||
|
Maximum oil capacity in sump |
3,4 litres |
||
|
Maximum engine operating angles - Front up, front down, right side, left side e |
35° |
||
|
Sump drain plug tapping size |
/ |
||
|
Shutdown switch setting (where fitted) |
|||
|
Oil pressure shut down switch |
/ |
||
|
Lubricating oil pressure |
|||
|
-relief valve opens.. |
262 - 359 kPa |
||
|
Minimum oil pressure. |
120 kPa |
||
|
Maximum continuous oil temperature (in rail) |
125°C |
||
|
Oil flow at rated speed |
6.6 litres /min |
||
| Spec#3 Alternator StamfordPI044E / Hidier HD7 |
|
CONTROL SYSTEM |
STANDARD AS480 AVR (SELF EXCITED) |
|||||||
|
VOLTAGE REGULATION |
± 1.0 % |
|||||||
|
SUSTAINED SHORT CIRCUIT |
SELF EXCITED MACHINES DO NOT SUSTAIN A SHORT CIRCUIT CURRENT |
|||||||
|
CONTROL SYSTEM |
AS480 AVR WITH OPTIONAL EXCITATION BOOST SYSTEM (EBS) |
|||||||
|
SUSTAINED SHORT CIRCUIT |
REFER TO SHORT CIRCUIT DECREMENT CURVE (page 7) |
|||||||
|
INSULATION SYSTEM |
CLASS H |
|||||||
|
PROTECTION |
IP23 |
|||||||
|
RATED POWER FACTOR |
0.8 |
|||||||
|
STATOR WINDING |
SINGLE LAYER CONCENTRIC |
|||||||
|
WINDING PITCH |
TWO THIRDS |
|||||||
|
WINDING LEADS |
4 |
|||||||
|
STATOR WDG. RESISTANCE |
0.588 Ohms AT 22°C SERIES CONNECTED |
|||||||
|
ROTOR WDG. RESISTANCE |
0.415 Ohms at 22°C |
|||||||
|
EXCITER STATOR RESISTANCE |
17.5 Ohms at 22°C |
|||||||
|
EXCITER ROTOR RESISTANCE |
0.211 Ohms PER PHASE AT 22°C |
|||||||
|
EBS STATOR RESISTANCE |
12.9 Ohms at 22°C |
|||||||
|
R.F.I. SUPPRESSION |
BS EN 61000-6-2 & BS EN 61000-6-4,VDE 0875G, VDE 0875N. refer to factory for others |
|||||||
|
WAVEFORM DISTORTION |
NO LOAD < 1.5% NON-DISTORTING LINEAR LOAD < 5.0% |
|||||||
|
MAXIMUM OVERSPEED |
2250 Rev/Min |
|||||||
|
BEARING DRIVE END |
BALL. 6309-2RS (ISO) |
|||||||
|
BEARING NON-DRIVE END |
BALL. 6306-2RS (ISO) |
|||||||
|
|
1 BEARING |
2 BEARING |
||||||
|
|
WITH EBS |
WITHOUT EBS |
WITH EBS |
WITHOUT EBS |
||||
|
WEIGHT COMP. GENERATOR |
80 kg |
78.3 kg |
83 kg |
81.3 kg |
||||
|
WEIGHT WOUND STATOR |
27 kg |
27 kg |
27 kg |
27 kg |
||||
|
WEIGHT WOUND ROTOR |
27.87 kg |
26.17 kg |
28.87 kg |
27.17 kg |
||||
|
WR² INERTIA |
0.0953 kgm2 |
0.0952 kgm2 |
0.097 kgm2 |
0.0953 kgm2 |
||||
|
SHIPPING WEIGHTS in a crate |
100 kg |
98.3 kg |
109 kg |
107.3 kg |
||||
|
PACKING CRATE SIZE |
71 x 51 x 67 (cm) |
71 x 51 x 67 (cm) |
||||||
|
TELEPHONE INTERFERENCE |
THF<2% |
TIF<50 |
||||||
|
COOLING AIR |
0.135 m³/sec 286 cfm |
|||||||
|
VOLTAGE SERIES |
220 |
230 |
240 |
|||||
|
VOLTAGE PARALLEL |
110 |
115 |
120 |
|||||
|
POWER FACTOR |
0.8 |
1.0 |
0.8 |
1.0 |
0.8 |
1.0 |
||
|
kVA BASE RATING FOR REACTANCE VALUES |
7.7 |
10.0 |
8.0 |
10.0 |
8.4 |
10.0 |
||
|
Xd DIR. AXIS SYNCHRONOUS |
2.26 |
2.94 |
2.15 |
2.69 |
2.07 |
2.46 |
||
|
X'd DIR. AXIS TRANSIENT |
0.23 |
0.30 |
0.22 |
0.28 |
0.21 |
0.25 |
||
|
X''d DIR. AXIS SUBTRANSIENT |
0.15 |
0.19 |
0.15 |
0.19 |
0.14 |
0.17 |
||
|
Xq QUAD. AXIS REACTANCE |
1.09 |
1.42 |
1.04 |
1.30 |
1.00 |
1.19 |
||
|
X''q QUAD. AXIS SUBTRANSIENT |
0.24 |
0.31 |
0.23 |
0.29 |
0.22 |
0.26 |
||
|
XL LEAKAGE REACTANCE |
0.09 |
0.12 |
0.08 |
0.10 |
0.08 |
0.10 |
||
|
X2 NEGATIVE SEQUENCE |
0.20 |
0.26 |
0.19 |
0.24 |
0.18 |
0.21 |
||
|
X0 ZERO SEQUENCE |
0.09 |
0.12 |
0.08 |
0.10 |
0.08 |
0.10 |
||
|
REACTANCES ARE SATURATED VALUES ARE PER UNIT AT RATING AND VOLTAGE INDICATED |
||||||||
|
T'd TRANSIENT TIME CONST. |
0.008 s |
|||||||
|
T''d SUB-TRANSTIME CONST. |
0.002 s |
|||||||
|
T'do O.C. FIELD TIME CONST. |
0.17 s |
|||||||
|
Ta ARMATURE TIME CONST. |
0.007 s |
|||||||
|
SHORT CIRCUIT RATIO |
1/Xd |
|||||||
| Spec#4 Control System ComAp InteliLite® MRS10 |
|
|
|
|
Spec #4.1 Features |
|
|
1 |
Automatic or manual start/stop of the gen-set |
|
2 |
Push buttons for simple control, lamp test |
|
3 |
Lockable battery isolator switch |
|
4 |
Graphic back-lit LCD display 128×64 pixels |
|
5 |
2 LED indicators |
|
6 |
Integrated wiring design |
|
7 |
Parameters adjustable via keyboard or PC |
|
8 |
Generator measurements (50/60 Hz):U1-U3, I1-I3, Hz, kW, kVAr, kVArh, kWh |
|
9 |
Selectable protections alarm/ shutdown |
|
10 |
3 phase Generator protections – Over-/under voltage – Over-/under frequency – Current/voltage asymmetry – Overcurrent/overload |
|
11 |
Analog oil pressure, water, temperature, fuel level, battery, voltage, engine speed (pick-up) |
|
12 |
Configurable programmable inputs and outputs |
|
13 |
Warm-up and cooling functions |
|
14 |
RS232 interface (AT-LINK CONV cable is necessary for IL-MRS 10) |
|
15 |
Dimensions 180×120 mm (front panel) |
|
16 |
Sealed to IP65 |
|
17 |
Custom-made is acceptable |
|
Spec #4.2 Functions |
|
|
Binary inputs/oupputs |
6/6 |
|
Analog inputs |
3 |
|
Pick-up |
- |
|
AMF function |
- |
|
Input configuration |
● |
|
Output configuration |
● |
|
Voltage measurement Gen./Mains |
3ph/- |
|
Current measurement |
3ph |
|
KW/KWH measurement |
●/- |
|
GCB/MCB control with feedback |
|
|
Extension units(periph) |
- |
|
Communication interfaces |
Rs232 |
|
Modem support |
- |
|
Battery charging alternator circuit |
● |
|
Spec #5 Options |
|
|
|
Items |
Options |
Select |
|
Engine |
Water Jacket Preheater |
|
|
Oil Preheater |
|
|
|
Alternator |
Winding Temperature Measuring Instrument |
|
|
Alternator Preheater |
|
|
|
PMG |
|
|
|
Anti-damp and anti-corrosion treatment |
|
|
|
Anti-condensation heater |
|
|
|
Generator Set |
Tools with the machine |
STND |
|
Fuel System |
Low fuel level alarm |
|
|
Automatic fuel feeding system |
|
|
|
Fuel T-valves |
|
|
|
Enclosure |
Open Type |
|
|
Silent/Super Silent Type |
|
|
|
Trailer Type |
|
|
|
Canopy/Enclosure Type |
|
|
|
Lubricating sys |
Oil with the machine |
|
|
Exhaust Sys. |
Protection board from hotness |
|
|
Cooling Sys. |
Front heat protection |
|
|
Coolant (-30°C) |
|
|
|
Control System |
Remote Control System |
|
|
ATS Control System |
|
|
|
Auto Synchronizing System |
|
|
|
Generator Set Output Cabinet |
|
|
|
Control Panel |
Czech·ComAp |
STND |
|
China·Hidier |
|
|
|
Denmark·Deif |
|
|
|
U.K.·Deepsea |
|
|
|
Voltages |
415/240V |
|
|
400/230V |
|
|
|
380/220V |
|
|
|
220/127V |
|
|
|
200-115V |
|
|
Contact Person: Mr. zhang
Tel: 18810288990
Fax: 86-189-9086-7684
