|
Product Details:
Payment & Shipping Terms:
|
| Sizing Tube Diameter: | 32-76mm | Sizing Tube Thickness: | 3-12.7mm |
|---|---|---|---|
| Bend Radius Before Squeezing: | 1.5D | Bend Radius After Squeezing: | 0.6-1.2D |
| High Light: | Tube Sizing Machine,Steel Pipe Bending Machine |
||
Small Tube Sizing Machine Membrane Panel Welding Machine for Boiler Pipe
1. Model
● This equipment is designed simply as C type and has 9 oil cylinders for hydraulic drive.
● It is used to squeeze and calibrate small heated elbow on the same level. A qualified 180°elbow of Φ=76mm thickness=12.7mm R=1.5D can be squeeze to R=0.6D and achieve technical requirement.
2. Technical detail
● Pipe diameter: D=Φ32-Φ76mm
● Pipe thickness: 3-12.7mm
● The bend radius of 180° elbow before squeezing: R=1.5D
● The bend radius of 180° elbow after squeezing: R=(0.6-1.2) D
● The maximum open distance of clamp made: L=400mm
● Squeeze pressure: F= 45t
● Calibration pressure: F=120t
● Hydraulic system pressure: N=16Mpa
● Pump power: N=18.5kw
3. Constitute
● C-type frame (lathe bed), have nine oil cylinder, hydraulic transmission
● Calibration cylinder maximum180t
● Back pressure cylinder
● Left and Right squeeze mechanism
● Up/down of under mode calibrated by slide
● Mainly uses PLC control, heating control in the same panel, simple operation, low failure rate. Use sensor to test squeezing distance
4. Parts supplied
|
No. |
Name |
Model |
Q’ty |
|
1 |
Main machine |
ZZSRJZJ |
1 |
|
2 |
Induction furnace |
|
1 |
|
3 |
Water cooling system |
|
1 |
|
4 |
Hydraulic system |
|
1 |
|
5 |
Mold |
Client provide size |
1 |
|
6 |
Control panel |
|
1 |
|
7 |
Operation table |
|
1 |
Contact Person: Mr. zhang
Tel: 18810288990
Fax: 86-189-9086-7684
