Product Details:
Payment & Shipping Terms:
|
High Light: | Induction Heating device,Induction Heating Machine |
---|
Industrial Melting Medium Frequency Induction Heating Machine 100KW
Quick Details
Place of Origin: Guangdong, China(Mainlan)
Brand Name: GY
Model Number:GYM-100AB
After-sales Service Provided: Enigneers available to service machinery overseas
Input power: Three phase 340V-430V
Input current: 150A
Output current:400-4000A
Specification
Model | GYM-100AB (Three phase) |
work power | 340V-430V |
Maximum input current | 150A |
Output power | 100KW |
fluctuating frequency | 1-10khz |
output current | 400-4000A |
the flow rate of cooling water | 0.08-0.16Mpa 10L/Min |
water temperature protection point | 50C |
product size | main : 820x600x1060mm |
transformer : 870x430x750 mm | |
net weight | main : 123gk |
transformer : 84kg |
Characteristics of GY induction heating machine Melting Furnace
1. Better Heating penetration and even temperature inside the melting metal.
2. GY medium frequency induction heating machine field force can stir the melting pool to achieve better melting quality.
3. Melting the Maximum quantity by the recommend machine according to above table the melting time is 30-50 minutes,the first melting whenthe furnace is cold ,and it will take about 20-30minutes for the later melting when the furnace is already hot.
4. Suitable for melting of steel,cooper,bronze,gold,silver and aluminum,stannum,maqnesium,stainless steel.
Compare with other equipment melting.
1. VS resistance heated furnace
a. High heat efficiency,melting fast.
b. Small size,save energy 30%.
c. Resistance or silicon carbide stock easy to damage.
2. VS Coal,Gas,diesel furnace
a. Facilitate the adjustment solution composition and temperature,the bubble of foundry less 1/3 to 1/4,
reject rate down 1/2 to 1/3,so that cast have a higher mechanical strength.
b. Reduced the oxidation of burning.
c. Induction melting can melt scrap of processing and the small pieces because of its electromagnetic
stirring effect.reducing the cost of materials.Reduce environmental pollution;noise is far below the
towering.equipment. Labor intensity of workers and working conditions have been improve;
d. Cast iron crucible used in Coast and gas furnace is harmful to the aluminum alloy by increasing
impurity. Graphite crucible used in induction melting without such disadvantages.
3. VS SCR or Frequency Melting Furnace
a. High heat efficiency, melting fast.
b. Small size, save energy above 20%.
c. Electromagnetic stirring effect is slight so service life of crucible is extended.
d. By adjusting the frequency to achieve power regulation, so melting speed fast, material elements of
burning loss less and better energy saving, in particular the heating of stainlesssteel, copper,silicon,
aluminum and other non-magnetic material, thus reducing the cost of the casting
Advantages:
1. Fast Heating
2. Wide coverage of heating
3. Easy Installation
4. Easy operation
5. Fast start-up
6.Low power consumption
7. High effectiveness
8. Comprehensive protection
9. Controllable temperature
10. Comprehensive full load design
11. Small size and light weight
12. Elimination of high voltage
Contact Person: Mr. zhang
Tel: 18810288990
Fax: 86-189-9086-7684