Payment & Shipping Terms:
induction hardening mahcine,
heat treatment mahcine,
Vertical CNC Induction Hardening Machine Tool
Advantages of Induction hardening:
1.Fast Heating:The minimum rate of heating is less than one second(rate of heating is available for adjustment and control)
2.Wide coverage of heating:It can be used to heat various metal parts (replace removable induction coil as per different shape).
3.Easy Installation:It can be used once it is connected with power source, induction coil as well as water supply pipe and rising pipe; it is small in size and light in weight.
4.Easy operation:You can learn to operate it within several minutes.
5.Fast start-up: It can be started to perform heating operation on condition that water and power supply is available.
6.Low Power Consumption:As compared with conventional vacuum tube high frequency equipments, it can save the power by approximately 70%.
The smaller the size of the work pieces, the lower power consumption would
7.High Effectiveness:It has such features as uniform heating ( it is applicable to adjust the spacing of the induction coil to ensure the appropriate temperature as required by each part of work piece ),
fast warming and limited oxic horizon, and can gurad against any waste after annealing.
8.Comprehensive protection:It has such functions as overvoltage, over-current, overheat and water shortage alarm indications as well as automatic control and protection.
9.Controllable Temperature:It is applicable to control the temperature for heating work pieces as per the preset heating time, and thereby control the heating temperature at a certain technical point.
10.Comprehensive full load design:It can work continuously for 24 hours
11.Small size and light weight:It has a weight of only several dozens of kilograms, of which, the limited floor space can effectively save the workshop space.
Sound operational environment: it is favorable for environmental protection, conservation of energy and safety operation, which is free of any noise, exhaust gas and dust.
12.Elimination of high voltage:it requires no step-up transformer which may produce approximately ten thousand voltage, and thus can ensure the maximum safety
Three phrase 380V/50Hz
Working voltage range (AC)
Max input current
Continuous load rate
Cooling water pressure
Transformer dimensions (L*W*H)mm
Gear/shaft/bearing/chain wheel,sproket hardening/quenching
Application of hardening :
It is mainly through the process of heating the workpiece material hardness of the metal after making changes.Specific applications are as follows:
A:various hardware tools, hand tools.
Such as pliers, wrench, hammer, ax, screwdriver, scissors (gardening scissors) and the quenching;
B:Various automotive, motorcycle accessories.
Such as crankshaft, connecting rod, piston pin, wheel, aluminum wheels, valves, rocker shaft, drive axle, a small shaft, fork, etc. quenching;
C:various power tools.
Such as gear, shaft;
D:the machine tool industry.
Such as machine tool bed, Machine Tool, etc. quenching;
E:various hardware metal parts, machining parts.Such as shaft, gear (sprocket), cam, clamps, fixtures, etc. quenching;
F:the metal mold industries.
Such as small mold, die attachment, die quenching the hole, etc.
Drill rod heated