Payment & Shipping Terms:
|Capacity:||15 Ton||Span:||12 M|
|Lifting Height:||18 M||Sling Type:||Wire Rope|
|Power Voltage:||3 Phase / 380 V / 50 Hz, Or As Per Client's Requirement||Control Mode:||Cabin / Ground / Pendent / Remote Control|
double girder overhead crane,
double beam crane
Industrial Double Girder Overhead Traveling Crane Big Span For Machine Shop
Detailed Product Description
Double girder overhead industrial crane is characterized by strong bearing, big span, and overall
stability with various models, but their quality is better compared with single girder gantry crane
with the same capacity. They are available with load capacities up to 50T and with spans up to
35 m. Articulated end carriage joints ensure positive contact of all four wheels with the track.
The range of fixing arrangements allows the appropriate integration of double girder travelling cranes
into new buildings as well as into existing buildings. Just as with all other types of double girder
travelling cranes, the profiles of the main girder are optimally produced using
computers so that maximum performance with a minimum of dead-weight can be achieved. An advantage that has financial benefits.
Double girder overhead crane with hoist are widely used in the following applications:
1. Light duty cranes for repair shops, light assembly operations, service buildings, light
warehouses, where service requirements are infrequent.
2. Medium duty cranes for machine shops and general industrial use both indoor and outdoor
3. Extra heavy duty cranes for steel mills and other heavy machine shops, steel warehouses,
heavy fabrication shops, paper mills etc. with magnet and bucket operation for scrap yards,
fertilizer plants & induction furnace.
4. Extra heavy duty cranes for steel mills and other heavy engineering purposes. Cranes
designed for hot metal application on request.
Design features include:
Compact dimensions, low weight, easy to operate and easy to maintain, modular design with
direct fits between components.
Bridge Girder, End carriages, Crab Frame manufactured from box plate design / Rolled Sections.
If required 100% radiography of all butt welding joints of bridge and end carriages can be provided.
Nante Crane uses sturdy cylindrical/ conical rotor polechanging motors with elegant continuous
cast aluminum sections, integrated safety brakes insulation class F, IP54 protection.
Variable Frequency Drives & Remote Controls:
We also offer Variable Frequency Drive in hoisting, cross travel, long travel for stepless speed
control as an optional feature. We also provide radio remote control cranes for application in
inaccessible and hazardous areas.
Failsafe magnetic or hydraulic brakes of 150% torque or more are fitted on shaft extensions. For
heavy duty cranes a second brake can be mounted to ensure failsafe operation.
Pendant control from floor, master control switches, master controllers in the driver's cabin can be
Radio remote control can be provided on request.
Modular design, covering a very wide operating range. The systems are designed for ease of
installation and maintenance and reliable operation, with fuseless circuitry, ducted wiring and
non-screwed terminals. Each drive group is equipped with a motor overload protection
device to provide effective protection against inadmissible overloading.
Every component & part is thoroughly scrubbed & painted with two coats of primer before
assembly & two coats of synthetic enamel after testing.
To prevent over hoisting & over lowering of hook.